Features And Benefits When Compared To SLA
Welcome to the first of a series of articles regarding Lithium Batteries. This article will cover the features and benefits of a Lithium Iron Phosphate battery (LiFePO4) when compared to traditional Sealed Lead Acid (SLA) battery technology. Since the discussion is around LiFePO4 and SLA, the article concentrates on 12VDC and 24VDC applications.
Different Lithium Technologies
Firstly, it is important to note that there are many types of “Lithium Ion” batteries. The point to note in this definition refers to a “family of batteries”.
Lithium Iron Phosphate Battery (LiFePO4)
Lithium Iron Phosphate Battery (LiFePO4) is a well-known lithium technology suitability to a wide range of applications.
Of all the lithium options available, there are several reasons why LiFePO4 has been selected as the ideal lithium technology for replacement of SLA. The main reasons come down to its favourable characteristics when looking at the main applications where SLA currently exist. These include:
Features and benefits of LiFePO4 when compared to SLA
Below are some key features a Lithium Iron Phosphate battery which give some significant advantages of SLA in a range of applications. This is not a complete list by all means, however it does cover the key items. A 100AH AGM battery has been selected as the SLA, as this is one of the most commonly used sizes in deep cycle applications. This 100AH AGM has been compared to a 100AH LiFePO4 in order to compare a like for like as close as possible.
Feature – Weight:
Weight has a large bearing on many applications, especially where towing or speed in involved, such and caravan and boating. Other applications including portable lighting and camera applications where the batteries need to be carried.
Feature – Greater Cycle Life:
The greater cycle life means that the extra upfront cost of a Lithium Iron Phosphate battery is more than made up for over the life use of the battery. If being used daily, an AGM will need to be replaced approx. 6 times before the LiFePO4 needs replacing
Feature – Flat Discharge Curve:
This feature is little known but is a strong advantage and it gives multiple benefits. With the flat discharge curve of LiFePO4, the terminal voltage holds above 12V for up to 85-90% capacity usage. Because of this, less amps are required in order to supply the same amount of power (P=VxA) and therefore the more efficient use of the capacity leads to longer runtime. The user will also not notice the slowing down of the device (golf cart for example) earlier.
Along with this the effect of Peukert’s law is much less significant with lithium than that of AGM. This results in having available a large percentage of the capacity of the battery no matter what the discharge rate. At 1C (or 100A discharge for 100AH battery) the LiFePO4 option will still give you 100AH vs only 50AH for AGM.
Feature – Increased Use Of Capacity:
The increased use of the available capacity means the user can either obtain up to 60% more runtime from the same capacity option in LiFePO4 battery, or alternatively opt for a smaller capacity Lithium Iron Phosphate battery while still achieving the same runtime as the larger capacity AGM.
Feature – Greater Charge Efficiency:
Another strong benefit in many applications. Due to the lower internal resistance among other factors, LiFePO4 battery can accept charge at a much great rate than AGM. This allows them to be charged and ready to use much faster, leading to many benefits.
Feature – Low Self Discharge Rate:
This feature is a big one for the recreational vehicles which may only be used for a couple of months a year before going into storage for the rest of the year such as caravans, boats, motorcycles and Jet Skis etc. Along with this point, LiFePO4 battery doesn’t calcify and so even after being left for extended periods of time, the battery is less likely to be permanently damaged. A Lithium Iron Phosphate battery is not harmed by not being left in storage in a fully charged state.
So, if your applications warrant any of the above features then you will be sure to get your monies worth for the extra spent on a Lithium Iron Phosphate battery. Follow up article will follow in the coming weeks which will include the safety aspects on LiFePO4 battery and different Lithium chemistries.
At BSLBATT® Batteries, we are a battery company which has been around for 15 years and have in depth experience and knowledge of a wide range of battery technologies. We have been selling and supporting Lithium batteries for many years into many applications so if there are any requirements you have or need any questions asked, feel free to contact us.
Back in 2016 when BSLBATT first began designing what would become the first drop-in replacemen...
BSLBATT®, a China Forklift battery manufacturer specializing in the material handling indust...
MEET US! VETTER’S EXHIBITION YEAR 2022! LogiMAT in Stuttgart: SMART – SUSTAINABLE – SAF...
BSLBATT battery is a fast-paced, high-growth (200% YoY ) hi-tech company that is leading the a...
BSLBATT is one of the largest developers, manufacturers, and integrators of lithium-ion batter...
Electric forklift and Floor Cleaning Machines owners who seek the ultimate performance will fi...
China Huizhou – May 24, 2021 – BSLBATT Battery today announced that it has joined Delta-Q Tec...
Big News! If you are Victron fans, this will be a good News for you. In order to better match ...